1.304 stainless steel is characterized by anti-corrosion and anti magnetism, that is, it does not conduct magnetism. Due to the non-magnetic characteristics, 304 stainless steel is widely used in high-voltage electromagnetic environment. If it is a general magnetic conductive metal material, it will be heated and red in the high-voltage electromagnetic environment, which will cause equipment accidents. Since 304 stainless steel is non-magnetic and will not heat, this problem will not occur.

2.Excellent welding properties; post-weld annealing is not required when welding thin sections. Two important considerations in producing weld joints in the austenitic stainless steels are:preservation of corrosion resistance.avoidance of cracking.

3.Its austenitic structure allows it to be deep-drawn without intermediate annealing, Making this the stainless steel grade of choice in the manufacturing of sinks, hollow-ware and saucepans.These grades work harden rapidly. To relieve stresses produced in severe forming or spinning, parts should be full annealed or stress relief annealed as soon as possible after forming.

4.The use of chip breakers is advised since the chips can be stringy. Stainless steel work harden rapidly, heavy positive feeds, sharp tooling, and a rigid set-up should be used.of cut below the work-hardened layer resulting from the previous passes.

The packaging of our products (eg. weathered corrugated steel, weathering corrugated steel,corten steel columnl,hot rolled stainless steel plate) ensures that they will not be damaged during transport. For export purposes, the usual export packaging is done in wooden crates or crates. All hr sheet metal, plates and coils are marked with a logo (company mark), grade, size and batch number. On request, we can customise the marking on the product,such as spcc cold rolled steel.