Stainless Steel 309 Round Rods36
Stainless Steel 309 Round Rods
13/02/2022
Stainless Steel 304L Round Bars26
Stainless Steel 304L Round Bars
13/02/2022

Instruction of Stainless Steel 304ln Round Bars

Stainless steel grade 304 is the most commonly used stainless steel. Stainless steel grade 304LN is a nitrogen-strengthened version of stainless steel grade 304.

Stainless Steel 304ln Round Bars32
Stainless Steel 304ln Round Bars
Stainless Steel 304ln Round Bars33
Stainless Steel 304ln Round Bars
Stainless Steel 304ln Round Bars34
Stainless Steel 304ln Round Bars
Stainless Steel 304ln Round Bars35
Stainless Steel 304ln Round Bars

Features of Stainless Steel 304ln Round Bars

1. Stainless Steel 304l Round Bars Corrosion Resistance:

  • Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.
  • Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.
  • At times, alloy 304L may show a lower corrosion rate than the higher carbon Alloy 304; otherwise, the 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments.
  • Alloy 304L is preferred for use in environments sufficiently corrosive to cause intergranular corrosion of welds and heat-affected zones on susceptible alloys.

2. Stainless Steel 304l Round Bars Heat Resistance:

  • Good oxidation resistance in intermittent service to 1600°F and in continuous service to 1690°F.
  • CContinuous use of 304 in the 800-1580°F range is not recommended if subsequent aqueous corrosion resistance is important.
  • Grade 304L is more resistant to carbide precipitation and can be heated into the above temperature range.

3. Stainless Steel 304l Round Bars Welding Characteristics:

Excellent welding properties; post-weld annealing is not required when welding thin sections. Two important considerations in producing weld joints in the austenitic stainless steels are:

  • preservation of corrosion resistance
  • avoidance of cracking

4.Stainless Steel 304l Round Bars Processing – Hot Forming:

  • To forge, heat uniformity to 2100 / 2300 °F
  • Do not forge below 1700 °F
  • Forging can be air cooled without danger of cracking

5. Stainless Steel 304l Round Bars Processing – Cold Forming:

  • Its austenitic structure allows it to be deep-drawn without intermediate annealing, Making this the stainless steel grade of choice in the manufacturing of sinks, hollow-ware and saucepans.
  • These grades work harden rapidly. To relieve stresses produced in severe forming or spinning, parts should be full annealed or stress relief annealed as soon as possible after forming.

6.Stainless Steel 304l Round Bars Machinability:

  • The use of chip breakers is advised since the chips can be stringy. Stainless steel work harden rapidly, heavy positive feeds, sharp tooling, and a rigid set-up should be used.of cut below the work-hardened layer resulting from the previous passes.

Marking and packaging of Stainless Steel 304ln Round Bars

The packaging of our products (eg. weathered corrugated steel, weathering corrugated steel,corten steel columnl,hot rolled stainless steel plate) ensures that they will not be damaged during transport. For export purposes, the usual export packaging is done in wooden crates or crates. All hr sheet metal, plates and coils are marked with a logo (company mark), grade, size and batch number. On request, we can customise the marking on the product,such as spcc cold rolled steel.

1
2
3

The Applications of Stainless Steel 304ln Round Bars

  • Grade 304LN stainless steel is widely used in the following applications:

    • Heat exchangers
    • Chemical industry
    • Food industry
    • Petroleum industry
    • Fabrication industry
    • Nuclear industry

Recommended Products

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please leave your requirements, we will reply to you within 24 hours!
Our operators are busy. Please leave your requirements, we will reply to you within 24 hours!
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad

Request A Quote Today