Stainless Steel 310 Plates11
Stainless Steel 310 Plates
Stainless Steel 309 Plates1
Stainless Steel 309 Plates

Instruction of Stainless Steel 309S Plates

Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.

Stainless Steel 309S Plates7
Stainless Steel 309S Plates
Stainless Steel 309S Plates8
Stainless Steel 309S Plates
Stainless Steel 309S Plates9
Stainless Steel 309S Plates
Stainless Steel 309S Plates10
Stainless Steel 309S Plates

Features of Stainless Steel 309S Plates

1. Stainless Steel 309s Sheets And Plate Corrosion Resistance:

  • Provide excellent corrosion resistance
  • More resistant to marine atmospheres than Alloy 304
  • Often used at higher temperatures to take advantage of their oxidation resistance
  • Have high resistance to sulfite liquors
  • Generally considered heat resistant alloys
  • Destructive scaling temperature is approximately 2000oF
  • Good scaling resistance with regard to continuous and intermittent services

2. Stainless Steel 309s Sheets And Plate High Temperaturecorrosion:

Alloy 309 resists high temperature corrosion in most in-service conditions. Operating temperatures are as follows:

  • Oxidizing conditions (max. sulfur content–2 g/m3)
    • 1922°F (1050°C) continuous service
    • 2012°F (1100°C) peak temperature
  • Oxidizing conditions (max. sulfur greater than 2 g/m3)
    • 1742°F (950°C) maximum temperature
  • Low oxygen atmosphere (max. sulfur content–2 g/m3)
    • 1832°F (1000°C) maximum temperature
  • Nitriding or carburizing atmospheres
    • 1562–1742°F (850–950°C) maximum

The alloy does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800) in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.

3. Stainless Steel 309s Sheets And Plate Fabrication:

  • Can be roll formed, stamped, and drawn readily
  • In process annealing is often required to reduce hardness and increase ductility

4. Stainless Steel 309s Sheets And Plate Heat Resistance:

  • Cannot be hardened through heat treatment because the consist solely of austenite at room temperature
  • Higher tensile and yield strengths that can be obtained through cold working and not followed by full annealing are not stable at the higher temperatures where these alloys are used
  • Creep properties can be negatively affected by the use of cold worked material at these higher temperatures

5. Stainless Steel 309s Sheets And Plate Welding Characteristics:

  • The austenitic class of stainless steels is generally considered to be weldable
  • Generally considered to have weldability equivalent to the most common alloys of the austenitic class 304 and 304L
  • Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion

Marking and packaging of Stainless Steel 309S Plates

The packaging of our products (eg. weathered corrugated steel, weathering corrugated steel,corten steel columnl,hot rolled stainless steel plate) ensures that they will not be damaged during transport. For export purposes, the usual export packaging is done in wooden crates or crates. All hr sheet metal, plates and coils are marked with a logo (company mark), grade, size and batch number. On request, we can customise the marking on the product,such as spcc cold rolled steel.


The Applications of Stainless Steel 309S Plates

Alloys 309 and 309S are used exclusively for their high temperature oxidation resistance, excellent high temperature strength, along with their resistance to creep deformation and environmental attack. Some examples include, but are not limited to:

  • Heating elements
  • Aircraft and jet engine parts
  • Heat exchangers
  • Carburizing annealing products
  • Sulfite liquor handling equipment
  • Kiln liners
  • Boiler baffles
  • Refinery and chemical processing equipment
  • Auto exhaust parts

Recommended Products

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
None of our operators are available at the moment. Please leave your requirements, we will reply to you within 24 hours!
Our operators are busy. Please leave your requirements, we will reply to you within 24 hours!
Have you got question? Write to us!
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad

Request A Quote Today