
Exports Stainless steel 317LN strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications:-
1. Stainless Steel 317l Sheets And Plates Corrosion Properties:
317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.
2. Stainless Steel 317l Sheets And Plates Welding:
317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.
3. Stainless Steel 317l Sheets And Plates Characteristics:
The packaging of our products (eg. weathered corrugated steel, weathering corrugated steel,corten steel columnl,hot rolled stainless steel plate) ensures that they will not be damaged during transport. For export purposes, the usual export packaging is done in wooden crates or crates. All hr sheet metal, plates and coils are marked with a logo (company mark), grade, size and batch number. On request, we can customise the marking on the product,such as spcc cold rolled steel.