Stainless Steel 330 Coils21
Stainless Steel 330 Coils
12/02/2022
Stainless Steel 317LN Coils11
Stainless Steel 317LN Coils
12/02/2022

Instruction of Stainless Steel 321 Coils

Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 – 1500°F (427 – 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low temperature toughness.

Alloy 321H (UNS S 32109) is the higher carbon (0.04 – 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000oF (537°C). In most instances, the carbon content of the plate enables dual certification.

Alloy 321 cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.

Stainless Steel 321 Coils17
Stainless Steel 321 Coils
Stainless Steel 321 Coils18
Stainless Steel 321 Coils
Stainless Steel 321 Coils19
Stainless Steel 321 Coils
Stainless Steel 321 Coils20
Stainless Steel 321 Coils

Features of Stainless Steel 321 Coils

1. Stainless Steel 321 Coil Corrosion Resistance:

  • exhibits good general corrosion resistance that is comparable to 304.
  • developed for use in the chromium carbide precipitation range of 1800 – 1500°F (427 – 816°C) .
  • can be used in most diluted organic acids at moderate temperatures .
  • can be used in pure phosphoric acid at lower temperatures.
  • can be used in up to 10% diluted solutions at elevated temperatures.
  • resists polythionic acid stress corrosion cracking in hydrocarbon service.
  • utilized in chloride or fluoride free caustic solutions at moderate temperatures.
  • does not perform well in chloride solutions, even in small concentrations, or in sulfuric acid service.

2. Stainless Steel 321 Coil Hot Forming:

  • Working temperatures of 2100 – 2300°F (1149 – 1260°C) are recommended for forging, upsetting and other hot working processes.
  • Alloy not suitable for work at temperatures below 1700°F (927°C).
  • Material must be water quenched or fully annealed after working to re-attain maximum corrosion resistance.

3. Stainless Steel 321 Coil Cold Forming:

  • Quite ductile and forms easily.

4. Stainless Steel 321 Coil Welding:

  • Readily welded by most standard processes.
  • Post weld heat treatment is not necessary

Marking and packaging of Stainless Steel 321 Coils

The packaging of our products (eg. weathered corrugated steel, weathering corrugated steel,corten steel columnl,hot rolled stainless steel plate) ensures that they will not be damaged during transport. For export purposes, the usual export packaging is done in wooden crates or crates. All hr sheet metal, plates and coils are marked with a logo (company mark), grade, size and batch number. On request, we can customise the marking on the product,such as spcc cold rolled steel.

1
2
3

The Applications of Stainless Steel 321 Coils

  • Aerospace – piston engine manifolds
  • Chemical Processing
  • Expansion Joints
  • Food Processing – equipment and storage
  • Petroleum Refining – polythionic acid service
  • Waste Treatment – thermal oxidizers

Recommended Products

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please leave your requirements, we will reply to you within 24 hours!
Our operators are busy. Please leave your requirements, we will reply to you within 24 hours!
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad

Request A Quote Today